Download Matrox M9140 User guide
Transcript
3 Change each Transfer Mode setting to “DMA if available”. 4 Click OK to accept the changes. Windows Vista – 2Cause 1Solution 3Cause 1 Click Start Æ Settings* ÆControl Panel Æ System and Maintenance* Æ System Æ Device Manager. (* Depending on your version and configuration of Windows, this part of the step may not be necessary.) 2 Double-click the IDE ATA/ATAPI controllers list item to expand it, then double-click the name of the appropriate controller. 3 Click Advance Settings. 4 Under Device Properties click “Enable DMA”. 5 Click OK to accept the changes. Too many programs may be running (using up computer resources). Close other programs, including memory-resident programs like System Agent. Your video player may not properly support the video file format. 1Solution Try using a different video player. Problem Mouse pointer flickers or disappears when it’s over a video window 1Cause 1Solution You may be using a customized mouse pointer. Windows draws customized mouse pointers in a way that may cause them to flicker or disappear while they’re over a video window. Windows 2000/XP/Vista – Use default Windows mouse pointers: 1 Windows 2000/XP – Click Start Æ Settings* Æ Control Panel Æ Printers and Other Hardware* Æ Mouse (double-click*). (* Depending on your version and configuration of Windows, this part of the step may not be necessary.) Windows Vista – Click Start Æ Settings* Æ Control Panel Æ Hardware and Sound* Æ Mouse (double-click*). (* Depending on your version and configuration of Windows, this part of the step may not be necessary.) 2 Click the Pointers tab. 3 In the Scheme box, select (or reselect) “(None)”, then click OK. 30 Matrox M-Series – User Guide