Download Getting Started with the Control System Toolbox
Transcript
4
Designing Compensators
% Close loop
clsys = feedback(sys,F,+1)
% Note positive feedback.
% Create the lowpass filter and add it in series with clsys.
s = tf('s');
lpf= 10/(s+10) ;
clsys_fin = lpf*clsys;
% Open- vs. closed-loop impulse responses
impulse(sys,'r--',clsys_fin,'b-')
This figure compares the open- and closed-loop impulse responses for this
example.
Figure 4-41: Comparison of Open- and Closed-Loop Impulse Response for the
LQG Example
4-54