Download Sharp 32L-S500 Operating instructions

Transcript
PIP (2 Tuner Picture In Picture)
L Using the various video input or the second tuner, you can
watch two programs at the same time.
During airing of commercial messages, you can watch
other program by using the CM SKIP function.
POWER
TV
VCR
INPUT
PIP
SWAP
L To view the Inset Picture.
Press PIP.
(Press the button to turn the Inset Picture on and off).
CM SKIP DISPLAY
FREEZE
MOVE
MUTE
SELECT
CM SKIP
SELECT
MOVE
L To swap the Main and Inset Pictures.
• Press SWAP.
(Press the button to swap the pictures again.)
Example:
1 2
Insert
Picture
Main Picture n 12CH
Inset Picture n INPUT1
Push SWAP.
L Channel Display when PIP is ON (4 seconds).
Example:
Main Picture — Channel 12
Inset Picture — Channel 6
1 2
6
PIP
SWAP
FREEZE
Main Picture
Channel display
for inset picture
INPUT
I N P U T 1
Channel display
for main picture
Main Picture n INPUT1
Inset Picture n 12CH
L To move the Inset Picture.
Press MOVE.
(Press the button again to move the Inset Picture to another
position.)
L To select the channel or input mode for the Inset Picture.
• If you want to change the channel or input mode, then press
SELECT to move the “ :” mark to channel display “SUB.”.
1 2
L Freeze-Frame Inset Pictures.
• When the Inset Picture is on the screen, press the FREEZE to
freeze the Inset Picture.
Only when the Main Picture is on the screen, press the FREEZE
to inset a freeze-frame of the Main Picture.
• Press FREEZE again to remove the Inset Picture.
1 2
Press INPUT.
(Each time you press the button, the picture will
change as shown below.)
1 2
1 2
1 2
L Commercial Skip Function
• Use this function when you want to scan other channels during
a commercial break.
(1) When a program break occurs, press CM SKIP. Then Main
Picture move to the Inset Picture. (While you are watching other
channels you can check the Inset Picture.)
1 2
1 2
(2) Press CM SKIP when the program in Inset Picture starts again.
Then Inset Picture moves to Main Picture.
NOTE:
• When the Main Picture’s signal is black and white or the signal
is lost, the Inset Picture may change to black and white. In this
case, the Inset Picture may appear with a bit of vertical jagged
lines depending on the type of receiving signal.
24