Download Epson PriorityFAX 2000 User guide
Transcript
6 Copying Note You can cancel the copy job during an operation. Press Stop/ Clear, and the copying will stop. This chapter gives you step-by-step instructions for copying documents. This chapter includes: Changing the settings for each copy • Selecting the paper tray • Copying • Changing the settings for each copy • Changing the default copy settings • Using special copy features • Copying on both sides of paper • Setting copy timeout Your machine provides default settings for copying so that you can quickly and easily make a copy. However, if you want to change the options for each copy, use the copy function buttons on the control panel. Note If you press Stop/Clear while setting the copy options, all of the options you have set for the current copy job will be canceled and returned to their default status. Or, they will automatically return to their default status after the machine completes the copy in progress. Selecting the paper tray Lighten/Darken After loading the print media for copy output, you must select the paper tray you will use for copy jobs. If you have an original containing faint markings and dark images, you can adjust the brightness to make a copy that is easier to read. 1 Press Menu until System Setup appears on the bottom line of the display and press Enter. 2 Press the Scroll buttons until Paper Setup appears and press Enter. • Normal: Works well with standard typed or printed originals. 3 Press the Scroll buttons until Paper Source appears and press Enter. • Dark: Works well with light print or faint pencil markings. 4 Press Enter when Copy Tray appears. Original Type 5 Press the Scroll buttons until the paper tray you want appears and press Enter. The original type setting is used to improve the copy quality by selecting the document type for the current copy job. 6 Press Stop/Clear to return to Standby mode. To select the document type, press Original Type. Each time you press the button, the following modes are available: To adjust the darkness of copies, press Lighten/Darken. Each time you press the button, the following modes are available: • Light: Works well with dark print. • Text: Use for originals containing mostly text. Copying 1 • Text/Photo: Use for originals with mixed text and photographs. • Photo: Use when the originals are photographs. Press Copy. Ready to Copy appears on the top line of the display. 2 Load originals face up into the ADF, or place a single original face down on the scanner glass. For details about loading an original, see page 5.1. 3 Enter the number of copies using the number keypad, if necessary. 4 If you want to customize the copy settings including copy size, darkness, and original type, by using the control panel buttons, see page 6.1. If necessary, you can use special copy features, such as poster copying, 2- or 4-up copying. See page 6.2. 5 Press Start to begin copying. 6.1 <Copying>