Download Agilent Technologies U1252A Technical data

Transcript
2
Making Measurements
Measuring Resistance, Conductance and Testing Continuity
CAUTION
Disconnect the circuit power and discharge all high-voltage capacitors
before measuring the resistance to prevent any possible damage to the
multimeter or the device under test.
Set up the multimeter to measure resistance as shown in
Figure 2- 7. Then probe the test points (by shunting the
resistor) and read the display.
nS
Ω
Black Lead
Red Lead
Figure 2-7 Measuring resistance
34
Agilent U1251A/U1252A User’s and Service Guide