Download Siemens S7-400 Technical data
Transcript
Integer Math Instructions 7.6 DIV_I Divide Integer Symbol DIV_I EN ENO IN1 IN2 OUT Parameter Data Type Memory Area Description EN BOOL I, Q, M, L, D Enable input ENO BOOL I, Q, M, L, D Enable output IN1 INT I, Q, M, L, D or constant Dividend IN2 INT I, Q, M, L, D or constant Divisor OUT INT I, Q, M, L, D Result of division Description DIV_I (Divide Integer) is activated by a logic "1" at the Enable (EN) Input. IN1 is divided by IN2 and the result can be scanned at OUT. If the result is outside the permissible range for an integer (16-bit), the OV bit and OS bit is "1" and ENO is logic "0", so that other functions after this math box which are connected by ENO (cascade arrangement) are not executed. See also Evaluating the Bits of the Status Word with Integer Math Instructions. Status word writes: BR CC 1 CC 0 OV OS OR STA RLO /FC x x x x x 0 x x 1 Example I 0.0 MW0 MW2 DIV_I EN IN1 IN2 ENO NOT OUT MW10 Q 4.0 S The DIV_I box is activated if I0.0 = "1". The result of the division MW0 by MW2 is output to MW10. If the result was outside the permissible range for an integer, the output Q4.0 is set. 7-6 Ladder Logic (LAD) for S7-300 and S7-400 Programming A5E00706949-01