Download Philips 32PFL5413D Specifications
Transcript
EN 84 9.7 9. Circuit Descriptions, Abbreviation List, and IC Data Sheets LC8.1U LA HDMI The MT5382 audio/video processor has three built-in HDMI receivers. An external HDMI switch (SIL 9185) has been added to support a 4th HDMI connector. The HDMI implementation supports CEC. The standby controller WT61P7 ensures CEC is also supported when set is in standby mode. Refer to figure “HDMI implementation” for details. H_17740_052.eps 250108 Figure 9-9 HDMI implementation Note: if on one of the HDMI inputs a DVI signal is connected, the analog audio inputs near the HDMI3 connector are automatically selected as audio input source. 9.8 AmbiLight (when present) The AmbiLight units are located in the back cover. Refer to figure “AmbiLight implementation” for details. AL- Left 8p daisy chain (J4) AL-Right 7p control (J2) 4p Power (J1) 1K04 1K01 SSB J4 H_17740_053.eps 250108 Figure 9-10 AmbiLight implementation For the connector pin assignments, refer to the Wiring Diagram in chapter 6 “Block Diagrams, Test Points, and Waveforms”.