Download Agilent Technologies E8403A Installation guide
Transcript
Starting ParBERT for the First Time Configuring ParBERT • GPIB Gateway This option defines whether the ParBERT controller operates as a GPIB instrument. It has to be selected for a PC that will be controlled by another PC. This also applies to configurations with the IEEE 1394 PC link to VXI option. In this case, the firmware server communicates with the modules through the IEEE 1394 PC link to VXI and with the user’s program through the GPIB interface card. See also Figure 3 on page 14. How to Set the I/O Interfaces and Systems Setting the I/O interfaces and systems requires two steps: 1. You have to select the interface to be used for communication. 2. You have to build the systems. Selecting the I/O Interface This procedure defines the I/O interfaces that the PC uses. To select the I/O interface: 1 In the Agilent 81250 Configuration Tool window, click the I/O Interfaces and Systems tab. The I/O Interfaces and Systems page comes to the top. Figure 50 80 Selecting the I/O interface Agilent 81250 ParBERT Installation Guide, February 2002