Download BeGaze 2.3

Transcript
Experiment Setup
38
separator message. Otherwise, the trial number separation is used.
Separation by trial number: If you use a trial number you have to set
associations 34 between stimulus image and trials manually.
Separation by trial separator message: If you use an trial separator
message it must have a specific format:
<Timestamp>MSG# Message: <image name>
Example:
28437864110MSG# Message: image01.bmp
This allows an automatic association 34 between stimulus images and
trials. The following image and video formats are supported: bmp, jpg,
jpeg, png, avi.
The separator message can be inserted in the IDF file during recording by
sending the remote command ET_REM to iViewX. The format has to be:
ET_REM "filename.suffix”
Example:
ET_REM "image01.bmp"
Auxiliary Events
You can choose if Trigger Events should be created by Trigger Message.
If so, the trigger message must have a specific format:
<Timestamp>MSG# Message: TRG: <trigger message>
Example:
28437864110MSG# Message: TRG: left Button up
The trigger message can be inserted in the IDF file during recording by
sending the remote command ET_REM to iViewX. The format has to be:
ET_REM "TRG:<trigger message>"
Example:
ET_REM "TRG: left Button up"
© 2009 SensoMotoric Instruments GmbH
Version 2.3