Download BT DIVERSE 5350 User guide

Transcript
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Handset does not ring.
The handset ringer may be
switched off.
Hold down ✱ to switch the ringer
back on.
The incoming caller’s number is
not displayed even though you
have Caller Display.
The caller’s number has been
withheld.
Caller has to allow their number to
be sent.
You keep hearing the error beep
(a descending tone).
You have pressed the wrong
button in a sequence.
Check the prompts in the display
or refer to instructions in the
user guide.
The answering machine does
not record any messages or
announcements.
Memory is full.
Delete old messages.
An answering machine message
does not have a time stamp.
The date/time is not set.
Set the date/time, see page 13.
During remote operation you are
unable to access messages
You have not changed the base
station PIN.
Change the base station PIN to
allow you to access messages
from another phone.
You cannot record your voice
pattern for voice activation.
Your recordings might have
sounded too different or were
not clear enough.
Try recording again but ensure you
speak clearly and record the words
using a similar tone.
You cannot dial, or use the
answering machine via voice
activation.
Your speech or commands were
not clear enough or, you have
not recorded the voice activate
for these commands.
Try speaking more closely or, ensure
voice activation is initiated.
Playback and delete new messages.
HELP
BT Diverse Helpline – 08457 908 070
73