Download Elation LED 60 Specifications
Transcript
Design LED 60 Strip WA™ This unit will keep and retain the last DMX command in the event of DMX signal failure. To reset the fixture you must turn the power off. DMX LED Indicator: The fixture has an LED indicator located by the dipswitches. This indicator has two functions as detailed below; 1) LED flashing green = No incoming DMX signal, fixture will function in stand-alone mode. Use the dipswitches to adjust the manual settings. 2) LED Solid Green = Fixture is receiving a DMX signal and will function in DMX mode. Use the dipswitches to set the DMX address. ©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com