Download Dcm DCM1212 Technical data

Transcript
Chapter
ZONE System Messages
41
ZONE-1002
Message
<timestamp>, [ZONE-1002], <sequence-number>,, WARNING, <switch-name>, WWN
zoneTypeCheck or zoneGroupCheck warning(<warning string>) at port(<port number>).
Probable Cause
Indicates that a zone filter or a zone group check failure occurred. The frame filter logic reported a
failure when creating or adding the zone groups during port login (PLOGI) trap processing. This
message usually indicates problems when adding the content-addressable memory (CAM) entries
before the filter setup.
Recommended
Action
If the message persists, execute the copy support ftp command and contact your switch service
provider.
Severity
WARNING
ZONE-1007
Message
<timestamp>, [ZONE-1007], <sequence-number>,, INFO, <switch-name>,
Ioctl(<function>) in (<error message>) at port (<port number>) returns code
(<error string>) and reason string (<reason string>).
Probable Cause
Indicates that the frame filter logic reported a failure during one of the IOCTL calls. The IOCTL call
from which the failure is reported is listed as part of the error message. This is usually a
programming error when adding the content-addressable memory (CAM) entries before the filter
setup.
Recommended
Action
There are two ways to avoid this problem:
Severity
• Avoid having too many hosts zoned with a set of target devices at a single port.
• Avoid having too many zones directed at a single port group on the switch.
INFO
ZONE-1010
Message
Probable Cause
<timestamp>, [ZONE-1010], <sequence-number>,, WARNING, <switch-name>, Duplicate
entries in zone (<zone name>) specification.
Indicates that there are duplicate entries in a zone object. A zone object member is specified twice
in a given zone object. This message occurs only when enabling a zone configuration.
Network OS Message Reference
53-1002489-01
193