Download Cisco ATA 187 Specifications
Transcript
Chapter 5 Parameters and Defaults Configuration Text File Template – IP address (e.g. 192.168.2.170) – Integer (32-bit integer) – Numeric digit string Note The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly stated. Note This section contains recommended values for the United States and other countries as configuration examples for certain parameters. For detailed recommendations of tone-parameter values by country, see Appendix E, “Recommended Cisco ATA Tone Parameter Values by Country.” Configuration Text File Template This is a listing of the sk_example.txt text file, without its annotations, that comes bundled with the Cisco ATA software. You can make a copy of this file and use it as a template for creating your own default configuration file or Cisco ATA-specific configuration file. For instructions on how to create these configuration files, see the “Creating a Cisco ATA Default Configuration File” section on page 3-9 and the “Creating a Configuration File for a Specific Cisco ATA” section on page 3-11. The sk_example.txt file contains all the Cisco ATA default values. The sections that follow this listing describe all the parameters in this file. #txt UIPassword:0 UseTftp:1 TftpURL:0 EncryptKey:0 upgradecode:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none upgradelang:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none Dhcp:1 StaticIp:0 StaticRoute:0 StaticNetMask:0 DNS1IP:0.0.0.0 DNS2IP:0.0.0.0 VLANSetting:0x0000002b CA0orCM0:0 CA1orCM1:0 CA0UID:0 CA1UID:0 EPID0orSID0:. EPID1orSID1:. PrfCodec:1 LBRCodec:3 MediaPort:16384 Domain:0 AudioMode:0x00350035 NumTxFrames:2 CallerIdMethod:0x00019e60 Polarity:0 FXSInputLevel:-1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SCCP (version 3.0) 5-2 OL-4652-01