Download HP 425s Technical data
Transcript
mount -a For a simple le-system disk, the following line in /etc/checklist will mount the drive on /users, with bus address 5 (normally not used by a root disk). /dev/dsk/5s0 /users hfs rw 0 1 # userdsk To mount the drive immediately, for this login session only, for instance, on the directory /users, you can execute the mount command directly from the command line: mount /dev/dsk/5s0 /users The mount command announces to the system that a removable le system is to be attached on the directory /users. This directory must exist already; it becomes the name of the root of the newly-mounted le system. 8 8-8 Configuring HP-UX for New Drives