Download RedMax EB7001RH Specifications
Transcript
4. Service Guide 4-13 Scavenging Duct Cover Assembly EBZ30/ 71/ 80 Series Gasket The scavenging duct covers have marking either “S” for starter side or and “F” for fan side. They must not be oppositely assembled. CAUTION When the engine is overhauled, be sure to replace the gaskets with new ones. Gasket “F” Scavenging Duct Cover “S” Scavenging Duct Cover REFERENCE EBZ4800, EBZ51 Series Strato Charged engines have no scavenging duct covers. 【Fan Side】 】 【Starter Side】 】 4-14 Muffler Assembly EB4300/ 6200, EB70 Series, EBZ4800, EBZ51/ 71/ 80 Series Tighten the three muffler mounting bolts to the same pressure. CAUTION Mounting Bolts (long) ・ After the engine is reassembled, run it at full throttle for more than one minute, then tighten the muffler mount bolts again. Torque: 8~ ~12N・ ・m (80~ ~120kgf・ ・cm) Muffler Mounting Bolts (short) Bracket 27 ・ The bracket may be damaged if the two muffler mounting bolts (long) on the upper side are securely tightened before the mounting bolt (short) on the lower side, is tightened.