Download Cisco CX-TRIP2 Specifications
Transcript
Product Description What is the Cisco 7000 Series? Network interfaces reside on modular interface processors, which provide a direct connection between your external network and the high speed Cisco Extended Bus (CxBus) in the Cisco 7000 series routers, and the CyBus in the Cisco 7500 series routers. Figure 5 and Figure 6 show the rear of the Cisco 7000 series routers: the seven-slot Cisco 7000 and the five-slot Cisco 7010. Access to the processor slots and the removable power supplies is from the rear, as shown. Two slots are reserved for the Route Processor (RP), which contains the system processor, and the Switch Processor (SP) (or Silicon Switch Processor [SSP]), which performs packet switching functions. The remaining slots support any combination of network interface types: channel attachment, serial, Ethernet, Fast Ethernet, multichannel interface, Token Ring, Fiber Distributed Data Interface (FDDI), or High-Speed Serial Interface (HSSI). Figure 5 Cisco 7000, Interface Processor End Captive installation screw DC AC FA IL PO WE R Upper power supply I O Captive installation screw DC AC FA IL PO WE H2358 R Lower power supply I O Slot 0 6 Token Ring Interface Processor (TRIP) Installation and Configuration 1 2 3 4 SP RP or slot SSP slot