Download Miele H 326 Technical data
Transcript
Installation 7 a. Fitting a DFB lightshield Follow the fitting instructions supplied with the lightshield. (Supplied as standard in Australia) 7 b. Fitting a lightshield to match the kitchen furniture Fit the grip into the openings on the deflector plate. Australia: The stainless steel lightshield DFB is supplied as standard. If you wish to fit a lightshield to match your kitchen furniture the stainless steel lightshield has to be taken off. Proceed as follows: 1. Remove both screws from the grip. 2. Take the grip off. 3. Loosen the 5 fixing screws to detach the lightshield from the grip. The furniture lightshield is then fitted to the grip as described in the next section. 28 Secure the grip in position with screws (3.0 x 15 mm) fitted into the underside of the deflector plate. Stick the three lengths of double sided adhesive tape to the grip. Remove the protective backing.