Download Sigma S2Ba Operating instructions
Transcript
Installation, electrical WARNING! Danger of electric shock A mains voltage may exist inside the motor or electrical ancil‐ laries. – If the housing of the motor or electrical ancillaries has been damaged, you must disconnect it from the mains immediately. The pump must only be returned to service after an authorised repair. What requires electrical installation? n n n n n n n n Motor External fan (optional) Stroke control drive (optional) Stroke adjusting drive (optional) Diaphragm rupture sensor (Option) Stroke sensor (optional) Pacing relay (option) Frequency converter (optional) Motor P_SI_0012_SW Fig. 18: Direction of rotation of motor WARNING! EX pumps in areas at risk from explosion – Protect drive motors with appropriate motor protection switches. Only use motor protection permitted for this kind of application with Ex"e" motors. (Protection against heating from overloading) – Ensure that motors are only installed and inspected by a "recognisably trained" skilled operative in areas at risk from explosion. – Observe the enclosed operating instructions for the Ex motor. CAUTION! The motor can be damaged Provide appropriate motor protection devices (e.g. motor pro‐ tection switch with thermal overcurrent trip) to protect the motor against overloading. Fuses do not provide motor protection. CAUTION! The pump can be damaged The pump can be damaged if the motor drives the pump in the wrong direction. – When connecting the motor, pay attention to the correct direction of rotation indicated by the arrow on the fan cover, as shown in Fig. 18. Install an electrical isolating device in the mains supply cable, e.g. a mains switch, to be able to switch off the pump independently of the entire installation (e.g. for repair). 24