Download Access VIRUS CLASSIC Specifications

Transcript
ACCESS VIRUS RACK
The First Filter
Now we'll look at a parameter that is not
assigned a dedicated knob of its own,
but can be dialed up in the display. This
type of parameter may be selected via
the PARAMETER buttons and then
adjusted with the VALUE knob or the
VALUE buttons.
Select the FILTER 1 Mode parameter via
the PARAMETER buttons. To do this,
make sure that the display is still in the
filter section FILT. This parameter enables
you to select a filter operating mode
from the four available options:
LP the low pass filter we have just
discussed.
HP the high pass filter which works in
the opposite manner of the low pass
filter: It suppresses the lower frequencies in a signal and lets the higher frequencies pass.
BP the band pass filter which suppresses both ends of the tonal spectrum and allows only a narrowly
defined bandwidth of the original
sound to pass.
BS The band stop filter, band reject
filter or notch filter which works in the
opposite manner of the bandpass filter. It allows all of the frequencies of a
signal except for a narrow frequency
band around the cutoff to pass. The
term “notch” is fairly descriptive; you
might say this filter chops a notch out
of the sound spectrum.
01111111111111111112
1 FILTER1
Mode
Lowpass≤
61111111111111111154
Now activate the different operating
modes and rotate the CUTOFF encoder
to get a feel for the way each filtering
option works.
Along with the CUTOFF encoder, the
RESONANCE encoder is the most important control feature of a filter. The filter
resonance increases the volume of the
frequencies located near the cutoff frequencies and suppresses the more
remote frequencies. This sound shaping
feature has a striking effect - especially
when used in conjunction with the low
pass filter: it produces a nasal or honking
type of tone which increases as you turn
the resonance up. Experiment by varying
the RESONANCE setting in the different
operating modes in conjunction with different CUTOFF settings. You will find the
effect that the RESONANCE encoder
achieves is markedly different for the
band stop filter in comparison to the
effect it has on the other filter types: as
the resonance increases, the bandwidth
23