Download Multitech MTCBA-C-U Specifications
Transcript
Chapter 3 – General Commands Chapter 3 - General Commands Attention AT Description: This two character command prefix is used to alert the module software that a command has been entered for processing. This prefix must be included in all commands unless otherwise noted. When entered alone, the module responds with OK to signify it is ready to process commands. Syntax: Command syntax: AT Command AT Note: Module in online mode. +++ Note: Reset module. AT Note: Module in offline mode. Possible responses Note: No response returned. Note: No response returned. OK Note: Ready to process commands. Request Revision Identification +CGMR Description: This command is used to display the operating software version. Syntax: Command syntax: AT+CGMR Command AT+CGMR Note: Get software version Possible Responses +CGMR: S/W VER: WISMOQ WQ1.1 Mar 20 2002 17:30:00 OK Note: Software Version WISMOQ, revision WQ1.1 generated on the March 20th, 2002 at 17:30:00 Electronic Serial Number +CGSN Description: This command allows the user application to get the ESN of the product. The ESN value is displayed in hexadecimal format. Syntax: Command syntax: AT+CGSN Command AT+CGSN Note: Get the ESN Possible Responses +CGSN: FE7A7704 OK Note: ESN read from NV Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 14