Download Agilent Technologies 16440A Technical data
Transcript
Connection Guide for Wafer Prober SMU/GNDU connection with prober NOTE Series Resistor and Shunt Resistor The series resistor and the shunt resistor can be used for preventing MCSMU from oscillation. If the MCSMU oscillates, insert either 100 series resistor or 50 shunt resistor. If it does not stop the oscillation, prepare the resistor of the other value and insert it between the Output High and the device under test (DUT). Figure 3-11 N1255A Input Panel and Output Panel Input Panel Input MCSMU 1 MCSMU 2 GNDU/SMU ±40 V&Max Force Sense ±40 V&Max Force Sense ±200 V&Max Force Sense High Force/ Sense Low Force/ Sense Circuit Common High Force/ Sense Low Force/ Sense Circuit Common Force/ Sense Circuit Common Guard Use N1254A-100 GNDU Adapter to connect GNDU. Circuit Common Circuit Common High Sense High Force Low Force Force Sense Guard Low Sense Guard Output Panel Output Low High 2 High 1 ±200 V&Max Sense Force ±240 V&Max Sense Force ±240 V&Max Sense Force Force/ Sense Circuit Common Force/ Sense Circuit Common Force/ Sense Circuit Common Open the Sense terminal if the switch is set to Non-Kelvin. Circuit Common Low Sense Circuit Common Low Force High Sense Circuit Common Agilent B1500A Configuration and Connection Guide, Edition 5 High Force Circuit Common 3- 11