Download Mitel 5001 User guide
Transcript
Troubleshooting and repair • Arp: Allows you to view the Address Resolution Protocol cache. If two hosts on the same subnet cannot ping each other successfully, run the command Arp -a command on each computer to see if the computers have the correct MAC addresses listed for each other. You can use IPConfig to determine a host's MAC address. If another host with a duplicate IP address exists on the network, the ARP cache may have had the MAC address for the other computer placed in it. Use the Arp -d command to delete an entry that may be incorrect. You can then add the correct entry using the Arp -s command. • Tracert: Allows you to view or modify the route table. Tracert uses the IP TTL field and ICMP error messages to determine the route from one host to another through a network. • Route print: Displays a list of current routes known by IP for the host. • Route add: Adds routes to the table. • Route delete: Removes routes from the table. • Netstat: displays protocol statistics and current TCP/IP connections. Netstat -a displays all connections. Netstat -r displays the route table and any active connections. Netstat -e displays Ethernet statistics. 169