Download Samsung STD24B Specifications
Transcript
OfficeServ 100 General Description Guide/Ed.00 4.2.1.17 Headset Operation Every keyset can be programmed to allow the use of a headset. In the headset mode, the hookswitch is disabled and the ANS/RLS key is used to answer and release calls. Keyset users may turn headset operation ON/OFF by keyset programming or more easily by pressing the headset ON/OFF key. The headset key lights steady red when the keyset is in headset mode. The ANS/RLS key lights if headset mode is activated by keyset programming only. 4.2.1.18 Hearing Aid Compatible All OfficeServ 100 keysets are hearing aid compatible as required by Part 68 of the FCC requirements. 4.2.1.19 Line Queuing with Callback When the desired outside line is busy, the user can press the CALLBACK key or dial the access code to place his/her station in a queue. The user will be called back when the line is available(a maximum of 100 callbacks are allowed system-wide at one time including busy station and busy trunk). 4.2.1.20 Line Skipping When the user is talking on an outside line and the automatic hold feature is turned off, he/she may press an idle line key and skip to that line without causing the previous call to go on hold. 4.2.1.21 Loud Ringing Interface The MISC board has 3 relays that can be programmed to provide a dry contact closure for control of a customer provided loud ringing device. Any of these relays can be programmed to operate with a specific station or station group. 4.2.1.22 Manual Signaling Phones can signal each other via a programmable button. This allows one station to alert another without establishing a voice conversation. Each press of the button results in a 500 milliseconds of ring tone being set to the intended station. An individual manual signaling button must be programmed for each station to be signaled. 4.2.1.23 Message Waiting Light/Indication When a message indication is left at a keyset, the MESSAGE button will slowly flash red. Single line telephones will receive a distinctive dial tone to notify them that a message is waiting. Message waiting indications can be left for any station or group of stations. © SAMSUNG Electronics Co., Ltd. 4-35