Download 970 User Guide (Firmware v2.10)
Transcript
970 User Guide Setup Menu Options The Setup Menu controls a wide range of parameters for the 970. The parameters are organized into categories, making the Setup Menu easy to navigate. The following tables show the parameter name, a description, options available, and the factory default setting where applicable. Default settings can be altered. (See “Setup Management and Firmware Upgrades”, page 48) File Storage Parameter Name Description Options 1 Drive Record/Network Mode A sub-menu with 4 items representing each drive slot. Options presented here are available for each of the 4 drive slots. Read Only: Drive is not used for recording, but is available for playback. Record: Drive will be written to during recording and is unavailable for network file transfer. Ethernet File Transfer: Drive is available for network access via Samba and unavailable for recording and playback. Switch to Network upon Full: Drive is effectively in Record mode until it becomes full, at which point it is effectively in Ethernet File Transfer mode. 2 Wave File Split Every Choose the file size limit of .wav files. When the limit is reached, the 970 will create a new .wav file (labeled • 2 GB sequentially with an alpha character) and continue »» 4 GB recording. • Read Only »» Record • Ethernet File Transfer • Switch to Network upon Full 3 File Name Format The format for file names as they are written to the drive. »» Drive-Reel-Clip • Reel-Clip • CamID-Reel-Clip • Reel-Scene-Take • Scene-Take • Reel-Scene-Take_Track Name 4 File Name Prefix Text to be placed before all other characters in each file name. 970 Name is set in [Network - This 970's Name] • Off »» 970 Name 5 CamID An identifying character for a camera »» A (single alpha to “Z”). 6 Reel Format Customize format for naming Reel folders with any alphanumeric value or set this parameter to Daily for automatically generated names with a value derived from the system’s date, using the format YYMMDD. »» Custom • Daily 7 Reel Current Reel number. When the Reel number is altered, the Clip number is reset to 1 • 1 (multi alphanumeric) 8 Clip Current Clip number. When the Reel or Scene is altered, the Clip number is reset to 1 »» 1 (numeric) 9 Scene/Shot Current Scene name. When the Scene name is altered, the Take number is reset to 1. »» “Scene 1” (multi alphanumeric) 10 Take Current take number. When the Scene name is altered, the Take and Clip number is reset to 1. »» 1 (numeric) 11 Scene Increment Mode • Disabled The method used to increment the Scene/Shot value »» Numeric when Stop+Fast Forward is pressed on the Main View. • Character Setup Menu Options # 51