Download ADL Manual - Space-Ray

Transcript
Install each tube individually and tighten torctite couplings
First tube section
Fig. 21c
First tube section
Tube Clamping Detail - B
U-Bolt Clamps
(snug fit)
Fan Tube
5/16-18 Nut
(1 each leg)
Burner Tube
Hanger Bracket
Weld seam to the
bottom of tubes.
5/16-18 Nut
(1 each leg)
Fig. 21d
6. For models ADU 40/45 suspend the hanger bracket for the second section of tube, raise the tubes into
position and join the tube sections together using Torctite couplings as described in Section 10.2 “Tube
Coupling Details”. Fasten the tubes onto the hanger bracket. See figure 21e, f and g below for installation
sequence.
ADU40/45 Second Tube Section Assembly
End Hanger Bracket
Torctite Couplings
First tube section
3254mm
Fig. 21e
-26-
Form #44201100
Sept 2010 Rev A