Download Sun Fire V490 Server Administration Guide
Transcript
CHAPTER 8 Configuring Network Interfaces and the Boot Device This chapter provides information and instructions that are required to plan and to configure the supported network interfaces. Tasks covered in this chapter include: ■ ■ ■ “How to Configure the Primary Network Interface” on page 144 “How to Configure Additional Network Interfaces” on page 146 “How to Select the Boot Device” on page 149 Note – Many of the procedures in this chapter assume that you are familiar with the OpenBoot firmware and that you know how to enter the OpenBoot environment. For background information, refer to “About the ok Prompt” on page 49. For instructions, refer to “How to Get to the ok Prompt” on page 126. Caution – Do not attempt to access any internal components unless you are a qualified service technician. Detailed service instructions can be found in the Sun Fire V490 Server Parts Installation and Removal Guide, which is included on the Sun Fire V490 Documentation CD. 143