Download SG-Systems Console U..
Transcript
22 Line Tests SG-Systems Console provides the ability to perform line tests on the connected Receiver. Line tests are defined through a set of one or more line test schedules. SGSystems Console enables adding, removing and modifying line test schedules, scheduling of line tests to automatically run in the background at a specified time, and manages all line test results. Line tests are only available on Sur-Gard System I, System III, and System IV Receiver configurations 22.1 Working with Line Test Schedules Before a line test can be executed, a line test schedule must be defined. SG-Systems Console enables you to create and manipulate line test schedules. 1. To access line test schedule configuration, right-click the Receiver Widget and select Device Settings. 2. On the Device Settings window, select Schedules under the Line Tests item in the Configuration Tree. You must be logged into SG-Systems Console as Admin to work with Line Test Schedules. 22.1.1 Adding a new Line Test Schedule 1. To add a new Line Test Schedule, click New or right-click the Line Test Schedules table and select New. 2. In the Name box, type in a name for the new line test schedule. 3. Click the Edit button to change the scheduled time for the line test. 4. Check/Uncheck the Enabled checkbox to enable/disable the line test to be automatically run by the Console at the scheduled time. 5. Click OK. 6. The new line test schedule will be displayed in the table. It will also be added to the Device Settings window Configuration Tree under the Line Tests Schedules tree item. 7. To work with line test entries for the newly created Line Test Schedule click on the line test schedule tree item that was just added to the Device Settings window’s Configuration Tree under Line Tests Schedules (see section 22.2). 22.1.2 Deleting an existing Line Test Schedule 1. Select the Line Test Schedule or Line Test Schedules to be deleted. 2. Click Delete or right-click the table and select Delete. 3. On the deletion warning message, click Yes. SG-Systems Console User Guide Version 2 75