Download Avocent PM20-20A

Transcript
18
Cyclades PM IPDU Installer/Administrator/User Guide
Arguments
on
Enables over current protection
off
Disables over current protection
status
Displays the current protection status
Examples
To display current protection status for all units, enter:
pm>currentprotection status
To enable current protection status for all units, enter:
pm>currentprotection ON
To disable current protection status for all units, enter:
pm>currentprotection off
NOTE: Current protection commands affect all IPDUs in the daisy chain and all phases of the PM42 IPDU.
cycle
The cycle command power cycles an outlet or group of outlets. You may use the outlet number or
the outlet name (see command name for details).
Syntax
cycle all|<outlet_string>
Arguments
all
Cycles all outlets in the PM IPDU or PM IPDU daisy chain
<outlet_string>
Outlet number, such as “5”, outlet name such as “sunfire”, or group
of outlets such as “1, 3-5”
Examples
To cycle outlet 3, enter:
pm>cycle 3
To cycle outlets 2, 3, 5, 6 and 7, enter:
pm>cycle 2, 3, 5-7