Download Miele DA 489-4 Ext
Transcript
Cleaning and care Changing the halogen lamps Disconnect the cooker hood from the mains supply by: – switching it off at the isolator or at the wall socket and removing the plug, or – withdrawing the fuse from the fused spur connection unit, or – withdrawing the mains fuse, or – removing the screw-out fuse (in countries where this is applicable). Exercise caution when changing halogen lamps. They get very hot during use, and remain hot for some time after being switched off. Do not touch the surface directly when changing a lamp, as grease particles from your fingers will adhere to the surface and damage it. Please follow the manufacturer’s instructions. To avoid damaging the lighting or the hob below, make sure you hold the lamp cover and halogen lamps securely at all times when handling them. ^ Pull the halogen lamp out of its socket. ^ Gently push the new halogen lamp into the socket (20 W with G 4 connector and side reflector, e.g. Osram MINISTARr with side reflector). It is important that the halogen lamps have side reflectors. The halogen lamp must be positioned with the reflector at the top so that the light is directed downwards. ^ Refit the lamp cover using the two screws. ^ Remove the cover to the lamp. To do this, loosen the screws to the left and right of the cover, unhook the lamp cover and take it downwards and off. 27