Download Intermec CK70a

Transcript
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version
Number
Date
Description of Change
005
11/2012
Added information to support firmware version 1.50:
• CloneNGo application
• New camera settings
• SceneEditor application
• EA30 imager extended reading range
004
2/2012
Revised information on ScanNGo bar codes.
003
12/2011
Added information on:
• the flashlight feature.
• the Carrier Selection application.
Revised information on:
• the Intermec Settings menus.
• upgrading the system software and the operating
system.
• GPS procedures.
• ScanNGo bar codes.
002
06/2011
Revised to add information on
non-incendive (NI) versions of the computer,
provisioning the computer, the new ScanDiagnostics
application, and how to use the 70 Series as a USB
mass storage device. Also corrected the cold boot
procedure and removed the compass.
70 Series Mobile Computer User Manual
iii