Download ABC Design Zoom
Transcript
8. Adjusting the leg rest To adjust the leg rest, press in the buttons on both sides and then adjust the height. Let go of the buttons again so that the leg rest clicks into place. 9. Fastening the harness To fasten the harness, bring the top two plastic catches together and interlock them. Then insert the interlocked catches into the bottom part of the fastening. Adjust the harness to a setting where the baby is held in the correct position. 10. Unfastening the harness To open the harness, press the button on the side. CAUTION: Always use the shoulder harness and lap belt together. 11. Adjusting the seat unit To adjust the seat unit, pull the retainer on the rear of the backrest upwards and then adjust the height of the seat. When you have reached the required position, let go of the retainer to allow the seat to remain in that position. 12. Adjusting the handle Push the button upwards to adjust the height of the handle. When the handle is at the required height, let go of the button again so that the handle will remain locked in this position. 13. Folding the pushchair NB: Remove the seat unit or carrycot before attempting to fold the pushchair. Pull the two release catches on the left and right sides of the handlebar up. Now use your foot to release the second catch which is on the left-hand rear wheel. You can now fold down the push-bar. Note: To unfold the pushchair, follow the instructions in point 1 “Opening the pushchair”. EN - 06
This document in other languages
- français: ABC Design Zoom
- español: ABC Design Zoom
- Deutsch: ABC Design Zoom
- русский: ABC Design Zoom
- Nederlands: ABC Design Zoom
- polski: ABC Design Zoom
- čeština: ABC Design Zoom
- slovenčina: ABC Design Zoom
- italiano: ABC Design Zoom