Download Epson EB-W28

Transcript
Adjusting Projected Images
40
e
Using the [
], [
], [ ], and [ ] buttons on the remote control,
or the [w], [v], [a], and [b] buttons on the control panel, correct
the position of the corner.
When you press the [ ] button, the screen shown in step 4 that
allows you to select the area to be corrected is displayed.
d
Using the [
], [
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
], [ ], and [ ] buttons on the remote control,
or the [w], [v], [a], and [b] buttons on the control panel, select
the corner to correct, and then press the [ ] button.
f
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
g
When you are done, press the [Esc] button to exit the correction
menu.
Because Keystone was changed to Quick Corner, the corner
selection screen shown in step 4 is displayed the next time you press
the [w] or [v] button on the control panel. Change Keystone to
H/V-Keystone if you want to perform horizontal and vertical
correction using the [w] or [v] button on the control panel.
s Settings - Keystone - H/V-Keystone p.84