Download Intel S5000XVNSATAR
Transcript
Intel® S5000 Server Board Family Datasheet 4.5.3 System Management Chassis ID LED The chassis ID LED provides a visual indication of a system being serviced. It is toggled by the chassis ID button Table 40. Chassis ID LED Indicator States 4.5.4 State Identify active via button LED State Solid on Off Off Front Panel / Chassis Inputs The BMC monitors the front panel buttons and other chassis signals. The front panel input buttons are momentary contact switches, which are de-bounced by the BMC processor firmware. 4.5.4.1 Chassis Intrusion Server platforms that use one of the Intel® 5000 Series Chipsets support chassis intrusion detection. The BMC monitors the state of the chassis intrusion signal and makes the status of the signal available. If enabled, a chassis intrusion state change causes the BMC to generate a sensor event message. The BMC boosts all fans when the chassis intrusion signal is active. Fans return to their previous level when the chassis intrusion signal is no longer active. This provides sufficient cooling when a technician has the cover removed while servicing the unit. 4.5.4.2 Power Button The power button signal is used to toggle system power. The button is activated by a momentary contact switch on the front panel assembly. This signal is routed to the BMC as a bidirectional signal that is monitored by the BMC after the BMC de-bounces the signal. It is also routed to the chipset signal via blocking circuitry that allows the BMC to lock-out the signal. The chipset responds to the press of the switch, not the release. If front panel lock-out is enabled and active, the power button does not power the system on or off. Instead an event message is generated to the system event log (SEL). See section 4.5.5 for details on secure mode. Revision 1.3 119 Intel order number D38960-006