Download Dell Force10 S4810P Command Line Reference Guide

Transcript
show fip-snooping fcf
Display information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address,
FCF interface, VLAN ID, FC-MAP value, FKA advertisement period, and number of ENodes connected.
S4810
Syntax
Parameters
show fip-snooping fcf [fcf-mac-address]
fcf-macaddress
Enter the MAC address of the FCF to display.
Command
Modes
•
EXEC
•
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Usage
Information
Example
662
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
The following describes the show fip-snooping fcf command shown in the
following example.
Field
Description
FCF MAC
MAC address of the FCF.
FCF Interface
Slot/port number of the interface to which the FCF is
connected.
VLAN
VLAN ID number the session uses.
FC-MAP
FC-Map value the FCF advertises.
ENode Interface
Slot/ number of the interface connected to the ENode.
FKA_ADV_PERIO
D
Time (in milliseconds) during which FIP keep-alive
advertisements transmit.
No of ENodes
Number of ENodes connected to the FCF.
FC-ID
Fibre Channel session ID the FCF assigns.
Dell# show fip-snooping fcf
FCF MAC
FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of
Enodes
------- ------------- ---- ------ -------------- -------------
FCoE Transit