Download Epson CX7000F Basic Guide
Transcript
You also need to set up your CX7000F Series to receive faxes manually. See page 39 for details. Setting Up Your Fax Features Before sending or receiving faxes, you may want to create a fax header, select your fax preferences, and set up a speed dial list of frequently used fax numbers. Creating Header Information 1. Press the Fax button once to enter Fax mode. The Fax button lights up and you see this display: Enter Fax Number 2. Press the Setup button. You see this display: 1.Select Speed D 3. Press the u or d button, or press the 6 key on the numeric keypad, to display this option: 6.Header & Time 4. Press the x Start Color/OK button. You see this display: 1.Fax Header Set 5. Press the x Start Color/OK button again. The display goes blank except for the cursor (_). 6. Press the keys on the numeric keypad to enter up to 28 digits of header information. Use the number keys to enter the letters A to Z (in uppercase or lowercase), the numbers 0 to 9, and various symbols. Press a key repeatedly to display first the numbers and symbols (if available), then the uppercase and lowercase letters, as indicated on the key. Then wait a moment or press the r button to move to the next character space. When you’re finished, press the r button to move to a blank space. Note: If you need to change a character to the left, press the l key to delete the character and re-enter it. Press the r key if you need to move the cursor to the right. 7. Press the x Start Color/OK button. You return to the 1.Fax Header Setup display. 30 Faxing a Photo or Document