Download HP 100VG Reference Guide
Transcript
3. Mount the Hub Do not install the HP AdvanceStack hub in an environment where the operating ambient temperature might exceed 55°C (131°F). Make sure the air flow around the sides of the hub is not restricted. Mounting the Hub Important A hub should be mounted only to a wall or wood surface that is at least 1/2-inch (12.7 mm) plywood or its equivalent. The following illustration shows you how to mount the Hub-7E under a table. 4-40 screws table mounting bracket number 10 pan head wood screw number 10 pan head wood screw When you select the mounting location, make sure you allow enough room to make the cable connections to the hub and to be able to access the cables if they have to be moved. When drilling into the table or other horizontal or vertical surface, you may need to first pre-drill the surface with a 3/32-inch bit. 5