Download NEC N8406-023 Command Reference Guide

Transcript
Statistics commands
Introduction
You can view switch performance statistics in the user, operator, and administrator command modes. This chapter
discusses how to use the ISCLI to display switch statistics.
The following table describes general Statistics commands.
Table 43 Statistics commands
Command
Usage
show layer3 counters
Displays Layer 3 Statistics.
Command mode: All
Displays SNMP statistics.
Command mode: All
Displays Network Time Protocol (NTP) Statistics.
You can execute the clear command option to delete all
statistics.
Command mode: All
Clears Network Time Protocol (NTP) Statistics.
Command mode: All except User EXEC
Displays Uplink Failure Detection statistics.
Command mode: All
Dumps all switch statistics. Use this command to gather data for
tuning and debugging switch performance. If you want to capture
dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump
command.
Command mode: All
show snmp-server counters
show ntp counters
clear ntp
show ufd counters
show counters
Port Statistics
The following table describes the Port Statistics commands. The following sections provide more detailed
information and commands.
Table 44 Port Statistics commands
Command
Usage
show interface gigabitethernet
<port number> dot1x counters
show interface gigabitethernet
<port number> bridging-counters
show interface gigabitethernet
<port number> ethernet-counters
show interface gigabitethernet
<port number> interface-counters
show interface gigabitethernet
<port number> ip-counters
show interface gigabitethernet
<port number> link-counters
show interface gigabitethernet
<port number> rmon-counters
Displays IEEE 802.1x statistics for the port.
Command mode: All
Displays bridging (―dot1‖) statistics for the port.
Command mode: All
Displays Ethernet (―dot3‖) statistics for the port.
Command mode: All
Displays interface statistics for the port.
Command mode: All
Displays Internet Protocol statistics for the port.
Command mode: All
Displays link statistics for the port.
Command mode: All
Displays RMON statistics for the port.
Command mode: All
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI)
55