Download Arrow VM108FBHD Instructions / Assembly

Transcript
Step 14
● Parts Needed For ●
● 8578 Right Roof Panel (1)
Right Roof Panel
G27
STEP
1
Installing the roof panels is best done
with a step ladder. Begin installing
roof panels at the back right corner of
the building. Each screw and bolt in
the roof requires a washer.
2
8579
1
8578
7571
NOTE
Measure the building diagonally
again and make adjustments to
make sure the building is square
and level. This will make the roof
panels fit better, and holes will
align.
7571
6
5
7743
8
7
7743
7571
10
9
7571
8578
4
3
8579
FRONT
NOTE
If a Roof Beef-Up Kit was
purchased, assemble prior to
STEP
attaching the roof panels.
2
8578 Right Roof Panel
7
1
2
8
3
1
Locate the roof panels by their
numbers. Note the sequence and
position they are to be installed.
4
5
6
2 Position the right roof panel at the
Hint: Attach fasteners in order shown
in diagram.
FRON
T
Nut
Washer
Gable
back right corner and fasten to the
gable with 6 bolts and nuts and roof
beams using 2 screws. Do not fasten
the lower end of the panel to the side
wall angle at this time.
Bolt
27