Download Operating Instructions

Transcript
Item
VIDEO OUT CHAR
VIDEO OUT ZEBRA
TC OUT
Chapter 7 Menu Operations
TC VIDEO SYNCRO
Setting
Notes
Specifies whether or not characters are superimposed • This setting is disabled when RC10
(remote controller) is connected
on VIDEO OUT signals.
in which case RC10 settings have
ON: Superimposes characters.
priority.
OFF: Does not superimpose characters.
Specifies whether or not zebra pattern is
superimposed on VIDEO OUT signals.
ON: Displays a zebra pattern also on images output
via the VIDEO OUT connector.
OFF: The zebra pattern is not displayed in video
output from the VIDEO OUT connector.
Sets the time code type output from the TC OUT
connector.
TCG: Outputs the time code generator value of the
camera at all times.
TCG/TCR: Outputs time code generator value during
camera recording and outputs the played back time
code during video playback. Sets the delay of time code output from the TC OUT
connector.
TC IN: Does not delay output of input to TC IN
connector. VIDEO OUT: Outputs the time code in line with delay
of video output from the VIDEO OUT connector.
DISPLAY SETUP screen
Item
EVF PEAK LEVEL
EVF PEAK FREQ
EVF SETTING
EVF B.LIGHT
EVF COLOR
ZEBRA1 DETECT
ZEBRA2 DETECT
ZEBRA2
MARKER
Setting
Adjusts the peaking level of the viewfinder and the
LCD monitor.
–7 ... 0 ... +7
Adjusts the peaking frequency of the viewfinder and
the LCD monitor.
HIGH, LOW
Adjusts viewfinder brightness and contrast on a
subscreen.
(Subscreen)
EVF BRIGHTNESS
EVF CONTRAST
Adjusts viewfinder backlight brightness.
HIGH, NORMAL, LOW
Selects whether the viewfinder image will be displayed
in color or monochrome.
ON: Color display
OFF: Monochrome display
Sets the level of the right-leaning zebra pattern 1.
50% ... 70% ... 109%
Sets the level of the left-leaning zebra pattern 2.
50% ... 85% ... 109%
Selects ZEBRA2 type. (For details, refer to page 79.)
ON, SPOT, OFF
Turns center marker displayed in the viewfinder and
on the LCD monitor on and off. (For details, refer to
page 78.)
ON, OFF
Notes
____ indicates the factory setting
138