Download Operating Instructions

Transcript
32
Chapter 8
Status displays/diagnostics
8
Status displays/diagnostics
8.1 Information 'zone text'
In case of certain operational states of the controller, a text is overlaid alternately with the actual value in the zone
display of the operating and display units. This text can be read out under the byte ZoneFMode for every zone
over all interfaces. The information is also designated as a zone text.
Since only the zone text with the highest priority can always be displayed, the zone text is to be considered exclusively as an extension to the status information of a zone. The byte ZoneFMode includes the following information:
Bit
on
0...5
Zone text Overview of zone texts
6
Control zone has correct model of the control Control zone does not have any correct model of
zone. At least a [P035] IDEN/IDEN - Heating the control zone. No [P035] IDEN/IDEN - Heating
Identification has been successfully carried out.
Identification has yet been successfully carried out.
7
Zone active.
Rev. 1.00.10
Subject to technical changes without notice
off
Zone passive.