Download CLIPSTER Configurations User Guide
Transcript
Video Format Settings 3 Setting the video format is for most works important and necessary. It is a function included in almost every module of the CLIPSTER software, e.g. in the CLIPSTER Edit Tool or the CLIPSTER I/O Tool. With it you are able to configure and determine the in- or output format (video raster) for a record or a play-out operation. Once your new settings are confirmed, the in- or outputs of CLIPSTER will change their video format respectively. Additionally, depending on the selected video format the video overlay in the respective CLIPSTER software module may change its aspect ratio. Regardless of the video format settings the SD outputs of CLIPSTER provide at all times a standard definition video signal and can be used to monitor the output of the CLIPSTER software. They can be configured via the Configuration Tool of CLIPSTER (see section “The Group SD-Aux” on page 2-23). Raster for film not included in the SDI standard (i.e. 2K with 20 Hz or more) can be output via the analog and DVI outputs only, and input via the DVI input. This chapter explains the individual items of the window to set the video format in detail. Both windows will be described: – the window that sets the video output format, as well as – the window that sets the video input format. 3-1 1 2 3 4 5 6 I