Download User's Manual

Transcript
4
Positioning with MDI
Bolt Hole Circle Patterns
Example: Entering data and executing bolt hole circles
The work steps “Enter circle pattern data,” “Display graphic” and
“Drill” are described separately in this example.
Z
Hole data
Enter the hole data separately (see pages 43 and 44) before entering the circle pattern data.
Circle pattern data
Number of holes:
Center point coordinates:
8
X = 50 mm
Y = 50 mm
20 mm
30°
C
B
Y
30°
0
1st step: Enter circle pattern data
50
0
Bolt hole circle radius:
Starting angle: angle between
X axis and first hole
mm
mm
mm
mm
mm
s
mm/min
R2
0
+50
3
0
– 20
5
0.4
80
50
Clearance height:
Setup clearance A :
Workpiece surface:
Hole depth B :
Pecking depth C :
Dwell time:
Feed rate:
A
X
Operating mode: POSITIONING WITH MDI
/
Go to the second soft-key row in the operating mode
POSITIONING WITH MDI.
Select Circle Pattern.
Select Full Circle.
50
TNC 124