Download SuperStack II Switch Management User Guide
Transcript
16950ub.bk Page 28 Monday, April 19, 1999 11:58 AM 28 CHAPTER 1: SUPERSTACK II SWITCH MANAGEMENT SOFTWARE Roving Analysis Your Switch supports roving analysis, a system that allows you to attach a network analyzer to one port and use it to monitor the traffic of other ports on the Switch. The system works by enabling you to define an analysis port (the port that is connected to the analyzer), and a monitor port (the port that is to be monitored). Once the pair are defined, and you enable the system, the Switch takes all the traffic going in and out of the monitor port and copies it to the analysis port. Roving analysis is used when you need the functions of a network analyzer, but do not want to change the physical characteristics of the monitored segment by attaching an analyzer to that segment. For information about setting up roving analysis ports, see “Setting Up Roving Analysis Ports” on page 87. Management Your Switch can be managed using three methods: ■ Web interface management — The Switch has an internal set of web pages that allow you to manage it using any Java-enabled Web browser. You can access the web interface using: ■ ■ ■ A management workstation connected to the console port of the Switch, running the Serial Line Internet Protocol (SLIP) Command line interface management — The Switch has a command line interface that allows you to perform limited management. You can access the command line interface using: ■ ■ ■ A management workstation connected over the network A terminal or terminal emulator connected over the network using Telnet A terminal or terminal emulator connected to the console port of the Switch SNMP management — You can manage the Switch using any network management application running the Simple Network Management Protocol (SNMP), such 3Com Transcend® Enterprise Manager software. For information about setting up your Switch for management, see “Setting Up for Management” on page 31.