Download Version 2.0 User's Guide

Transcript
PROGRAM EDITOR
Below the keygroup tabs are the keygroup parameters. These are sib-divided into logical
‘pages’:
ZONES
Parameters related to setting up keygroup zones
FILTER/KGRP Parameters related to setting up the filters and keygroups
ENVELOPES For setting up the amplitude, filter and auxilliary envelopes
LFOs
For setting the two Low Frequency Oscillators
MODULATION For assigning and setting modulation sources and destinations.
Parameters can be changed simply by dragging on the appropriate pot on the panel (if you
have an Intellimouse or similar multi-button mouse with a ‘wheel’, the wheel may be used to
adjust pots). Envelopes are set by dragging on the ‘handles’ on the envelope shape graphic.
Some parameters (LFO waveform, filter type, etc.) present you with pop-up lists from which you
can select your options in the usual way by scrolling up to them and releasing the mouse on
the appropriate selection:
Simply move the mouse through the list to select the LFO waveform. If your mouse is
equipped with a wheel, you should be able to scroll through the list using that.
The filters work in a similar fashion:
Simply move the mouse up and down the list to select the filter type you want to use. If your
mouse is equipped with a wheel, you should be able to scroll through the list using that.
ak.Sys - Version 2.00
Page 38