Download Vision Sensor User manual

Transcript
Vision Sensor User manual
You require administrator authorisation for these functions (see user administration).
Fig. 40: Vision Sensor Device Manager, IP- Setup
s. chap. Network settings / Ethernet connection Network settings, Short reference and Network connection
4.5.7 Update / Firmware update
You can update the firmware of the selected sensor through the menu item File/Update.
The appropriate firmware update file must first have been obtained via download from www.festo.com.
In the support portal search for "SBSI".
Select the appropriate firmware file in the file dialogue box that opens and follow the instructions.
Do not disconnect the power to the sensor during this process unless prompted by the onscreen instructions.
Fig. 41: Vision Sensor Device Manager, Firmware update
4.5.8 User administration / Passwords
The Vision Sensor configuration distinguishes between three user groups, which have different authorisations:
Page 46
Vision Sensor SBSI-EN, 8033104 - 1401N12.05.2014