Download User Manual - CareFusion

Transcript
Specifications and Symbols (Continued)
Specifications (Continued)
Alaris Auto-ID Module
Electronic Memory:
System configuration parameters stored in volatile memory are retained for at
least 6 months by PC unit internal backup lithium battery. Module-specific Auto-ID
parameters are stored for 8 hours by PC unit when system is turned off. After 8
hours of continuous off time, or if module is changed, system automatically purges
module-specific information.
Fluid Ingress Protection:
IPX1, Drip Proof
Mode of Operation:
Continuous
Shock Protection:
Type BF patient applied part.
Weight:
1 ±0.1 lbs (436.5 ±43.65 g)
Handheld Scanner
Dimensions:
3.25" W x 7.25" H x 4.25" L
(8.3 cm W x 18.4 cm H x 10.8 cm L)
Housing:
UL 94V0 flammability rating
Weight:
6.5 oz (178 g)
Symbolology
The Auto-ID module supports an optional handheld scanner that can be used to scan a patient's ID,
medication labels and clinician badges. The Auto-ID module and handheld scanner read printed
barcodes which are within the barcode print quality guidelines specified by ANSI X 3.182, CEN EN 1635,
and ISO/IEC 15416 international standards. Some manufacturer-applied barcodes on IV bags are
not compliant with these quality standards and might not be readable with the Auto-ID module and
handheld scanner. Refer to the Auto-ID Label Guidelines for more detailed barcode label information.
Symbols
See the PC unit section of this User Manual for system symbols.
Symbol
Meaning
Input. Handheld connection point.
Type BF patient applied part.
Alaris™ System User Manual – with v9.17 Model 8015
Auto-ID Module Section
General Information 6-17