Download AT Commands User Manual
Transcript
The following table shows the +CLCC parameters. <Parameter> Description <state> 0 Disable CLCC unsolicited indication 1 Enable CLCC unsolicited indication The default value is 0. <idx> Integer type, call identification number <dir> 0 Mobile originated call (MO) 1 Mobile terminated call (MT) <call state> <mode> The state of the call 0 Active 1 Held 2 Dialing (MO call) 3 Alerting (MO call) 4 Incoming (MT call) 5 Waiting (MT call) 6 Released Bearer/Teleservice 0 <mpty> <number> Voice Call Multiparty status 0 Call is not part of a multiparty call 1 Call is one of multiparty call parties Phone number in the format specified by <type>. Contains a string of up to 32 characters. <type> Phone number display format. Type of address octet in integer format (refer to GSM 04.08 [8] subclause 10.5.4.7) Note: 161 Local number 145 International number with access character + When a mobile-originated call is routed to PSTN (PABX), no ALERT indication is prompted. Example: AT+CLCC=? +CLCC: (0,1) OK AT+CLCC AT C o m m a n d s U s e r M a n u a l Page 60 of 212