Download (DSPC-8682E) User Guide

Transcript
4.4.2. Usage
User can use the shell script "Lightning_PCIE/examples/script/DSPC8682E/ethernet.sh" to
setup Ethernet program on each DSP automatically. The following steps set up ethernet
program on 8 DSPs.
1. Perform the init_1000.sh to initialize DDR
2. Perform the ethernet.sh to convert client_evmc6678l.out to client_evmc6678l.hex and
load the hex file into each DSP.
# /Lightning_PCIE/examples/script/DSPC8682E/ethetnet.sh 8
Translating to Intel format...
"../../web/client/evmc6678l/DSPC8682E/client_evmc6678l.out"
==> .text:_c_int00
"../../web/client/evmc6678l/DSPC8682E/client_evmc6678l.out"
"../../web/client/evmc6678l/DSPC8682E/client_evmc6678l.out"
==> .const
"../../web/client/evmc6678l/DSPC8682E/client_evmc6678l.out"
==> .switch.1
"../../web/client/evmc6678l/DSPC8682E/client_evmc6678l.out"
"../../web/client/evmc6678l/DSPC8682E/client_evmc6678l.out"
==> .switch.2
"../../web/client/evmc6678l/DSPC8682E/client_evmc6678l.out"
==> .cinit
Load HEX image: ../../../bin/DSPC8682E/client_evmc6678l.hex to
address 0x80300000
Load HEX OK
Load HEX image: ../../../bin/DSPC8682E/client_evmc6678l.hex to
address 0x80300000
Load HEX OK
Load HEX image: ../../../bin/DSPC8682E/client_evmc6678l.hex to
address 0x80300000
Load HEX OK
Load HEX image: ../../../bin/DSPC8682E/client_evmc6678l.hex to
address 0x80300000
Load HEX OK
Load HEX image: ../../../bin/DSPC8682E/client_evmc6678l.hex to
address 0x80300000
Load HEX OK
Load HEX image: ../../../bin/DSPC8682E/client_evmc6678l.hex to
address 0x80300000
Load HEX OK
Load HEX image: ../../../bin/DSPC8682E/client_evmc6678l.hex to
address 0x80300000
Load HEX OK
Load HEX image: ../../../bin/DSPC8682E/client_evmc6678l.hex to
address 0x80300000
Load HEX OK
==> .text
==> .vecs
0:0, start
1:0, start
2:0, start
3:0, start
4:0, start
5:0, start
6:0, start
7:0, start