Download Microlink 3000 Hardware User Manual

Transcript
Microlink 3000 Hardware User Manual
10.5 3804—Count-to-Voltage Converter
The 3804 is an up/down counter which converts its count to a
voltage signal. This voltage is suitable for input to a 3050 module. The
3804 consists of a 12-bit counter plus a 12-bit digital-to-analogue
converter. It also has a low pass filter to produce smoothed voltages
from data which itself might be quite noisy. The maximum count rate is
10 MHz.
The 3050 which receives the count may be included in a high speed
scan.
10.6