Download Operating Instructions
Transcript
Technical Information Mode Display resolution *1 (dots) 1360 x 768 1366 x 768 1376 x 768 1280 x 768 D-WXGA 1280 x 800 1280 x 768 D-SXGA 1280 x 1024 D-1035i 1920 x 1035i D-1080i 1920 x 1080i D-1080p 1920 x 1080 Scanning frequency H (kHz) V (Hz) Dot clock frequency (MHz) Picture quality * PnP 47.700 60.00 86.67 A 56.160 72.000 100.19 A 46.500 50.000 67.40 A 48.360 60.00 86.67 A 48.360 60.00 86.67 A 47.776 59.870 79.50 AA 60.289 74.893 102.25 AA 68.633 84.837 117.50 AA 49.572 59.870 83.282 AA 41.200 50.000 68.557 AA 49.702 59.810 83.50 AA 63.980 60.020 108.00 AA 58.289 69.975 98.858 AA 60.044 71.995 102.795 AA 62.790 74.928 106.492 AA 71.553 84.879 122.498 AA 55.993 69.991 94.964 AA 57.675 72.004 97.817 AA 63.98 60.02 108.00 A 60.276 58.069 93.067 A 31.65 29.8 53.48 A 33.75 60.00 74.25 A 28.125 50.00 74.25 A ○ 33.75 60.00 74.25 A ○ ○ ○ H ○ 67.5 60.00 148.50 A ○ 56.25 50.00 148.50 A ○ D-WXGA+ 1440 x 900 55.935 59.887 106.50 A D-WSXGA+ 1680 x 1050 65.290 59.954 146.25 A D-WUXGA 1920 x 1200 74.038 59.950 154.00 A Format ***** “i” added to the resolution value indicates an interlaced signal. ***** Picture quality is indicated by the following symbols. AA: Maximum picture quality can be obtained. A: Signals are converted by the image processing circuit. ***** Where marked "○" signals indicates in Plug and Play is compatible with EDID of projector. Unmarked signals in Plug and Play may also be compliant if input terminals are written in the format list. Where Plug and Play is unmarked and nothing is wirtten in the format list, difficulties in projecting image may occur even when computer and projector appear to have same resolution. Note zz The number of display dots is 1280 x 800. Appendix A signal with a different resolution will be projected after converting the resolution to match the projector display. zz When interlaced signals are connected, flicker may occur on the projected image. 74 - ENGLISH